External return spring for rear brake master cylinder

Some models use 70mm spring FUA17667 for rear master cylinder - we recommend measuring yours before ordering

 2 in stock

 17667651 GU17667651 17 66 76 51
 1766 7651 1766.7651 17.66.76.51

Complete drilled fully floating stainless steel EBC Brake Disc. Used for rear and front left hand brake disc for Le Mans 1000, 1000S. Rear brake disc only on Cali 3, Cali 1100, Spada 3, Strada 1000

Also known as Guzzi ref 28613660, 30635860. This is an update to the non floating disc ( 28613300 / 28613301 ) fitted to front of Nevada, Lario, T5, SP II, Monza 2, V75 and V35 3. Always fit new brake pads when replacing a brake disc - BRA54724 . Use disc bolt BRA30460

 2 in stock

28613670-z 28613670 GU28613670 28 61 36 70
 2861 3670 2861.3670 28.61.36.70

Universal hydraulic brake light switch. This hydraulic switch replaces discontinued brakelight switches by bolting in place of a single banjo bolt on the handlebar or rear brake master cylinder

NB stop light switch may be supplied with or without 2 pin block connector. Can be used in place of Guzzi ref. 32657060

 1 in stock

Complete drilled fully floating stainless steel EBC Brake Disc for front right hand side

Also known as Guzzi ref 28613660, 30635860. This is an update to the non floating disc ( 28613300 / 28613301 ) fitted to front of Nevada, Lario, T5, SP II, Monza 2, V75 and V35 3. Always fit new brake pads when replacing a brake disc. Use disc bolt BRA30460

 1 in stock

28613670-z 28613670 GU28613670 28 61 36 70
 2861 3670 2861.3670 28.61.36.70

Pair of Brembo 07BB1408 carbon ceramic brake pads for Brembo P2 F08 (P8) calipers

For P08/F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers

 1 in stock

28654601-z 28654601 GU28654601 28 65 46 01
 2865 4601 2865.4601 28.65.46.01

Also fits Benelli 354 Rear, Benelli Sei Fronts, Ducati 250/350/450 Desmo Fronts (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso Fronts (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2 Fronts, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 RGS Corsa Rear, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 Fronts (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

Front brake master cylinder cap and rubber kit for Brembo PS 13 / PS16 master cylinder. Screw holes parallel to top and bottom edges

Brembo ref. 110430860

 1 in stock

Also fits Ducati 907 i.e.

Polished adjustable aluminium brake lever for PS 11, PS 13 and PS 16 master cylinders

Also known as Guzzi ref. 10270652. See HAA10850 for lever pivot pin and BRA01630 for span adjustable alternative lever

 1 in stock

30605680-z 30605680 GU30605680 30 60 56 80
 3060 5680 3060.5680 30.60.56.80

Rubber brakelight switch cover, 90 Degree

Also known as Guzzi ref. 10352710

 1 in stock

12735100-z 12735100 GU12735100 12 73 51 00
 1273 5100 1273.5100 12.73.51.00

Steel fixed rear brake pipe with threaded connectors at each end

Rigid brake pipe

 1 in stock

 17658650 GU17658650 17 65 86 50
 1765 8650 1765.8650 17.65.86.50

Brakelight switch for handlebar mounted master cylinder

Stop light switch also known as Guzzi ref. 30530526. Please compare with your existing switch to check compatibility. Can be used as a substitute for ELA27815 or ELA30860. Sometimes supplied with three terminals, in this instance disregard middle terminal. Please note that terminals are smaller than standard switch and will need to be soldered on.

 1 in stock

 30749860 GU30749860 30 74 98 60
 3074 9860 3074.9860 30.74.98.60